You have no items in your shopping cart.
Super Concentrated PRI-G Gasoline Fuel Treatment - ON SALE Complete Gasoline Fuel Treatment – Pint (16 oz size)
*Pri-G has been reformulated to work better with Ethanol gasoline (E-10)* Finally, an economical way to store gasoline for both short and LONG TERM Storage for cars, trucks, boats RVs, lawn mowers, snow blowers and standby power generators. The problem with normal gasoline is that within 60 days it begins to deteriorate and "breakdown". PRI-G stops this process two ways. First it stops the formation of gums and lacquers in the fuel system, and second it prevents the stored fuel from reacting with the metal container or tank. In addition, it offers many other benefits as described below.
Pri-G is a super concentrated, complete fuel treatment that improves any type of gasoline, enabling it to perform to maximum potential. PRI-G’s industrial strength, enhanced thermal stability chemistry reacts with fuel upon contact, and provides multiple benefits to any gasoline engine:
* Engines perform better and last longer
*Engine power increased and fuel economy realized
*Fuel stays fresh for up to 10 YEARS or longer (with recommended annual treatment)
*Hesitation, knocking, and pinging reduced Improved Engine Performance – PRI-G works chemically within all gasoline to improve the combustion process. Improved combustion means improved engine performance.
You will realize increased power from your engine. At the same time, you will enjoy greater fuel economy. PRI-G reduces the hesitation, knocking, and pinging that is common in gasoline engines. It is also extremely effective at cutting harmful emissions. Reduced Maintenance Costs – PRI-G’s proprietary, refinery-grade chemistry is unsurpassed at preventing carbon deposits and fuel system fouling. Your engine will remain cleaner and last longer, which means maintenance costs are significantly reduced.
Keep your car, boat, or RV in great shape for years to come! Extended Storage Life – Properly treated with PRI-G, your gasoline will stay fresh in storage for up to 3 YEARS or LONGER (with recommended annual treatment)! You’ll be assured a fast start next season simply by treating your fuel with PRI-G prior to storage.
PRI-G goes one step further, by actually restoring old fuel to refinery-fresh conditions. If you are storing gasoline for any period of time, you can’t afford to be without PRI-G fuel storage treatment. Super Concentrated – PRI-G is super concentrated, treating fuel at a 1:2,000 ratio. This means PRI-G is extremely cost effective to use. Get the most out of your gasoline for LESS than 6¢ Per Gallon!
Keep your Generator fuel in tip-top condition with PRI. Consider also your emergency standby power generator for power outages and blackouts. Your generator is only as reliable as the fuel it burns. Generator manufacturers and service technicians agree that between 50% to 70% of standby generator failures are directly attributable to the effects of degraded fuel quality as all fuels will go bad in storage… sometimes within a matter of weeks. PRI-G is a small price to pay to protect your generator investment so you'll be prepared when distaster strikes. Also excellent for use with your marine and RV generator systems.
PRI-G is the ultimate, multi-purpose fuel treatment for any engine. This powerful fuel stabilizer is formulated to address each and every one of the most common fuel problems. To use PRI-G, you add the correct amount of PRI-G to treat the entire tank capacity, then immediately add the fuel to the tank. (1 oz. of PRI-G to 16 gal of fuel). PRI-G is available in 16 oz. (pint) that treats up to 256 gallons and 32 oz. (quart) that treats to 512 gallon of gas. Comes in easy squeeze dosing bottle with built in measuring top. Bottle Size Gallons Treated 16 Ounces 256 gallons 32 Ounces 512 gallons 1 Gallon 2,000 gallons Safe To Use – PRI-G’s enhanced thermal stability chemistry works within the fuel instead of altering it, which means the product is completely safe to use. Fuel specifications aren’t changed, so engine warranties are not voided! PRI-G is safe and effective in both four stroke and two stroke engines. Use PRI-G today and start getting the most out of your gasoline and your engine.
Benefits By Using PRI-G Gas Treatment
FACT: PRI-G cuts unburned hydrocarbon emissions. BENEFIT: Pass your emissions test without costly repairs plus less polutants.
FACT: PRI-G is unmatched in keeping fuel fresh. BENEFIT: Eliminate costly fuel system repairs by preventing stale, gummy fuel with PRI-G.
FACT: PRI-G is superior in restoring old fuels to freshness. BENEFIT: Don't waste money disposing of old fuel. Restore your fuel with PRI-G.
FACT: PRI-G prevents power-robbing carbon deposits in all gas engine types. BENEFIT: The fuel efficiency you will gain with PRI-G will pay for the product many times over! You also avoid the risks associated with "carbon flush" type additives.
FACT: PRI-G dramatically extends engine life. BENEFIT: PRI-G saves on expensive engine repairs and overhauls.
FACT: PRI-G enhances operating efficiency & economy. BENEFIT: PRI-G gives you the power you need when you most need it.
FACT: PRI-G lubricates & cleans fuel systems. BENEFIT: Fouled injectors mean fuel thrown away. PRI-G keeps injectors clean, saves fuel, and prevents costly repairs of your fuel system.
FACT: PRI-G complies with engine manufacturers' fuel specifications. BENEFIT: Why take a chance on losing your warranty and incurring expensive repairs because of a poor quality "additive"? PRI is used in the world's largest engines.
PRI-G Frequently Asked Questions (FAQs)
Q: Will the use of PRI-G void my engine manufacturer's warranty? A: No. PRI-G complies with the fuel specification requirements of all engine manufacturers. PRI-G does not alter fuel in any harmful way. In fact, PRI-G greatly enhances fuel stability - improving upon the minimum specifications for fuel stability required by many engine manufacturers.
Q: But my engine manufacturer does not recommend the use of fuel additives. Why? A: Given the fact that literally thousands of fuel additives are offered on the market, engine manufacturers have no way of monitoring or testing the claims of so many products - making it difficult to determine specific products that are safe to use. However, PRI chemistry does not alter any fuel specifications issued by engine manufacturers - specifications by which manufacturers judge whether or not a particular fuel affects safe engine operation. PRI has been safely used in thousands of engine types.
Q: Does PRI-G eliminate water from fuel? A: PRI-G only absorbs small amounts of tank condensation that can occur over a several day period. However, PRI-G does not absorb large amounts of water into fuel. Using a fuel treatment chemistry to absorb large amounts of water is not a good idea. Large amounts of water absorbed in fuel can severely damage fuel injectors and fuel injector pumps. It is better to remove water by either draining the tank or by using special water removal filtration systems.
Q: I have fuel that has been sitting in storage for several years. Will PRI-G help make this fuel better? A: Yes. When thoroughly blended with fuel, PRI-G will restore even the most degraded fuels to a refinery-fresh, usable condition - provided the stored fuel does not contain metals or foreign chemistries not compatible with refined fuel. Although the fuel will be restored to usable specification, PRI-G does not restore the fuel to original color.
Q: How long will PRI-G preserve fuel freshness? A: This depends on the initial quality of the fuel. Independent test data shows that PRI-G can preserve most gasolines for many years. However, it is recommended that PRI-G be applied to the fuel at least every 9 - 10 months.
Q: Should I use a double or triple dose of PRI-G for really tough fuel? A: No. PRI-G is fully effective at the recommended dose rate.
Q: What if I accidentally over treat with PRI-G - will it hurt anything? A: No. But it will be wasting money.
Q: I understand that PRI-G prevents carbon build-up. Does it remove old carbon from my engine components? A: In older engines, PRI-G only removes the more newly formed, soft carbon. PRI-G does not remove hard carbon deposits. First, it is never wise to use any chemistry that removes hard carbon deposits in older engines. The hard carbon actually fills in worn areas in upper ring areas and valve seats. Removal of hard carbon in these cases can result in poor component-to-component tolerances - causing piston slap, poor valve seating, and other problems. However, PRI will still remove deposits from injector tips.
Q: Will PRI-G eliminate tank sludge? A: PRI-G will eliminate tank sludge when consistently used. PRI-G's powerful dispersants are the same chemistries used to dissolve heavy, asphaltene laden sludge in the most challenging heavy fuel oils. The length of time it takes for PRI-G to remove this sludge is dependent upon the degree of sludge contamination. Hence, complete sludge removal may take just a few days - or a few months. For extra-heavy amounts of tank sludge, we recommend a proper tank cleaning, followed by filling with PRI treated fuel to prohibit future sludge formation.
Q: If PRI chemistry is so effective, why don't refiners put it into their fuel at the pump? A: Refiners do put very small amounts of additives into fuel. However, gasoline marketing is highly competitive and refiners make every effort to offer fuel at the least cost. The addition of additives at their most effective dosage rates would result in higher prices - and petroleum marketers would risk losing market share.
Q: We have much cleaner gasoline today. Why would I want to use an additive? A: By comparison, gasoline today is initially much cleaner than gasoline sold 10 or 20 years ago when it is first produced. However, today's fuels are less stable today because they are produced through cracking processes versus the less efficient "straight-run" processes used years ago. As a result, today's fuels deteriorate at much faster rates - resulting in excessive carbon build-up in your engine. Given the varying length of time it takes for fuel to be consumed after refining, it is wise to freshen fuels every tankful with PRI-G to ensure maximum combustion and performance.
Q: Isn't it costly to use PRI-G every tankful? A: No. Because the use of PRI-G results in more efficient combustion, fuel economy is greatly improved. The fuel savings more than pays for the cost of treatment. In the long-term, the capability of PRI-G to prevent carbon deposits actually extends engine life - since it is the hard carbon with untreated fuels that accelerates abrasion and wear.
Q: Is it okay to use PRI-G with other additives? A: PRI-G effectiveness will not be affected by other additives. However, PRI-G is a multifunctional product designed to overcome all fuel issues. There is no reason to use any additional additives when PRI-G fully does the job.
Q: Why doesn't PRI-G boost the octane rating of gasoline? A: PRI-G uses a safer, more effective method to improve power and performance.
Q: How do I dose PRI-G to my tank? A: When adding PRI-G for the first time, estimate the entire tank capacity and treat for that amount. Put PRI-G into tank just prior to fueling when tank is 1/4 to 1/2 full. Immediately add fuel. On follow-up dosing, simply estimate the amount of fuel to be added, treat the tank, then immediately add fuel. PRI-G must be added at the time of fueling to work properly. If you put PRI-G into the tank, drive to the pump, then add fuel, PRI-G will have been fully activated only with the fuel it originally touched. For consumers, PRI-G bottles have E-Z measuring dosing reservoirs to permit accurate dosing. For tank sizes of 5,000 to 10,000 gallons, it can be added directly. For tank sizes greater than 10,000 gallons, online dosing is recommended.
Q: Is PRI-G like these engine oil treatments that coat parts? A: No. PRI-G affects only fuel behavior. PRI-G contains no solid materials and does not coat engine parts.
Q: Are any of these oil treatments effective? A: We do not evaluate or test engine oil treatments.
Q: Aren't all gasolines essentially the same? A: No, not at all. Even when processed by the same refiner, gasoline quality can vary considerably day-to-day depending on the crude oil feedstock used and the processing controls implemented at the refinery.
Q: I have a very high mileage engine and I'm not getting better performance with PRI-G. A: PRI-G is not a "mechanic in a bottle" and can't replace worn rings, cylinder liners, or worn out injectors. However, PRI-G is recommended for operators of older equipment in that PRI-G will keep fuel tanks and fuel delivery systems clean, minimizing problems.
Q: I have about 100,000 miles on my engine. Is it too late to start using PRI-G to prevent wear? A: No. PRI-G can add years to "middle-aged" engines by stopping excessive wear and carbon build-up.
Q: Is PRI-G good for two-stroke engines, like marine outboards, lawnmowers, jet skis and motor bikes? A: PRI-G should be mandatory for use in two-stroke gasoline engines. Carbureted engines are especially wasteful of fuel and prone to produce heavy carbon. It is much better to use PRI-G in every tank to prevent carbon build-up and more complete combustion than it is to run a harsh solvent cleaner through the engine to "blow-out" carbon. The latter approach presents a risk of loose carbon lodging in an upper ring area, causing engine damage. PRI-G is also great for EFI systems and the latest direct injection systems.
Q: I've been using PRI-G for many months with good results. However, this summer PRI-G doesn't seem to be giving me the fuel economy improvement I usually get. What's the problem? A: There are two reasons. First, gasoline expands in hotter weather and fuel economy consequently drops. Without PRI-G, you can expect a greater fuel economy loss. Secondly, engines work harder in the summer, operating under higher heat while providing horsepower to run air conditioning compressor units. PRI-G helps improve fuel combustion and efficiency when your engine needs it most.
Q: I have had a vapor locking problem in hot weather. Will PRI-G do anything for this? A: Yes. Many of our PRI-G clients report they no longer have vapor locking problems.
Q: In my area, we have oxygenated fuels that contain MTBE or ETBE. Is PRI-G compatible with these oxygenate additives? A: PRI-G is compatible both with oxygenates and the other additives provided by retail gasoline marketers. In fact, refiners report that oxygenated fuels are about three percent less efficient than prior formulas. Some consumers report even greater reductions in fuel efficiency with these fuels. By improving combustion, PRI-G helps provide better fuel economy when oxygenated fuels are your only choice.
Q: What's the story on oxygenated fuels? Are they good or bad? A: There is a considerable amount of information available on oxygenated fuels on the World Wide Web. We suggest you browse the web and research the issues regarding these fuels.
Shipping Note: Ground shipping only. CANNOT be shipped by Air.
Item Number: 5499
Ship Weight: 0.96 lbs.